Golden XRS 3
CR Test Phantom
The CR Test Phantom complies with ASTME2445-05, ISO16371-1 and EN147841 standards and is CE certified.
Testing Elements included:
- T shaped brass target (laser beam jitter, MFT check, blooming / flare)
- Pro-NDT DuplexWireIQI test object (basic spatial resolution, unsharpness)
- BAM snail made of lead and low absorbent material (central beam alignment)
- Two converging line pairs resolution patterns (Pro-Res MAM ConeType)
- Three Ø19x0.3mm (EL, EC, ER) measuring points (shading correction)
- Cassette positioning locator
- Homogeneous 0.5mm Al strip (scanning slipping, shading)
- Two cm/inch rulers (linearity check)
- Three contrast sensitivity gauges made of Al, Cu and stainless steel with four holes of different depth.
Duplex Wire IQI
IQI Duplex Wire is compliant with current industry standards:
•ASTM E2002-99 Duplex IQI
•EN 13068 (Radioscopy)
•EN 14784 and ISO 13671 (CR -Computed Radiography with imaging plates)
•ISO 17636-2 (digital radiography of welds -flat panel detectors)
•ASTM E 2597 (characterization of digital detector arrays)
The kit includes:
•Duplex wire IQI Gauge
•User manual, including guidelines for carrying out each test, results assessment and registration.
•A calibration / test certificate, according to ASTM E 2002 and ISO 19232-5
Tramex WDIK5.1 Water Damage Restoration Inspection Kit
A complete kit for moisture testing of concrete & wood flooring and numerous other building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. Featuring the Trammel MEP moisture meter for non-invasive testing of moisture conditions in numerous building materials such as drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. The Trammel CMEX2 digital concrete moisture meter allows for testing per ASTM F2659 and the reusable Hygro-i probe for testing relative humidity, temperature and dew point in the environment, or performing ASTM F2170 (and ASTM F2420 with optional Hood) for relative humidity readings in concrete slabs. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the Hygro-i probe. A heavy-duty pin-probe measures Moisture Content in wood. The Water Damage Restoration Inspection Kit comes in a protective heavy-duty carrying case with die-cut foam lining.
Tramex EIK5.1 External Insulation Finishing Systems Inspection Kit
A complete kit featuring the Trammel RWS Roof and Wall Scanner (a combination of the Wet Wall Detector and the Leak Seeker) for instant, non-destructive evaluation of moisture conditions deep within Exterior Insulation and Finishing Systems (EIFS). The EIFS Inspection Kit includes the Trammel MRHIII moisture and humidity meter, a pin-type resistance probe and a Hygro-i relative humidity probe to provide the ideal solution for measurement of ambient relative humidity, temperature and dew point, determination of moisture conditions in a variety of wall materials, sheathing and wood studding of EIFS systems, as well as in-depth readings of the moisture conditions of the substrate.
Tramex CIK5.1 Concrete Inspection Kit
Concrete Inspection Kit (CMEX2, 4 Hygro-i Probes, SAL75, 12 Hole Liners, IRT2)
Instant, non-destructive concrete moisture content test from 0 - 6.9% with CMEX II to ASTM F2659
Fastest, most reliable Hygro-i® RH probe for testing to ASTM F2170
Perform multiple tests simultaniously
Re-usable Hygro-i ® Relative Humidity probes prove to be the lowest cost per ASTM F2170
Tramex RIK5.1 Roof Inspection Kit
Non-Destructive, deep penetration moisture testing
7" Pin-Probe for deep penetration
Instant concrete moisture measurement
The Roof Inspection Kit allows for point-of-contact, non-destructive checking of moisture conditions in roofing and waterproofing systems up to approximately 4 inches in depth, as well as non-destructive measurement of moisture conditions in concrete decks, wood decks and ambient relative humidity & dew-point conditions. Featuring the handheld Trammel RWS Roof and Wall Scanner non-invasive impedance scanner and the Trammel CMEX II electronic moisture meter and Hygro-i relative humidity probe. This kit comes in a protective, heavy-duty carrying case with die-cut foam lining.
Tramex DSAL Moisture Meter Scanner
Non-destructive impedance moisture meter
Three ranges of sensitivity enabling the inspection of a variety of roof membranes and insulation thicknesses
Ergonomic easy-reach and easy to operate control panel
The Trammel Dec Scanner is a mobile non-destructive impedance scanner designed for the instant surveying of moisture conditions in roofing and waterproofing systems.